Hook Park masterplan brings 2,000-home proposal to Kingston’s edge

25/02749/OUT| Outline application for a phased development including demolition of existing structures and the provision of new homes (Use Classes C2 and C3), non-residential uses (Use Classes E, F and Sui Generis), open spaces and other ancillary infrastructure.

Planning_Statement



(The information below is taken from the Planning Statement, Design Codes statement and the Design and Access statement and should not be considered an endorsement) Some local residents oppose the scheme – see here

An outline planning application has been submitted for a major new mixed-use neighbourhood on what the applicant describes as grey belt (A term used for Green Belt land judged to have lower landscape and environmental value due to prior disturbance or infrastructure.) land at Hook, Chessington. The site covers approximately 25.8 hectares between the A3 Esher Bypass, the A309 Kingston Bypass, Hook Road and Clayton Road. It straddles the Kingston and Elmbridge boundaries, although all built development would take place within the Royal Borough of Kingston upon Thames. The land is currently a mix of paddocks, equestrian facilities, scrapyard land, reprofiled ground linked to HS2 works and other urban fringe uses, which the applicant argues gives it a lower Green Belt value than open countryside.

At its largest extent, the scheme proposes up to 2,000 new homes, a care home, local shops and cafés, workspaces, community facilities and extensive new public open space. Around half of all homes are claimed to be affordable. The site is currently occupied by a mixture of paddocks, equestrian facilities, scrapyard land, reprofiled ground linked to HS2 works and other fringe uses. The applicant describes this as ‘grey belt’ land rather than high-quality Green Belt countryside.

This is an outline application, meaning that individual buildings are not being approved at this stage. Apart from access roads, what is being decided is the principle of development, the scale, the mix of uses, the infrastructure strategy and the design rules that future building phases must follow. Delivery would take place in phases over approximately ten years.

Two aspects of the application stand out as unusual for a development of this scale and location: a headline commitment to 50 percent affordable housing, and a strongly infrastructure-led approach, with roads, parks, drainage and movement systems fixed at outline stage rather than left to later negotiations.

The proposal is also notable for how it has been submitted. Unusually, the developer has included a full Design Code (see more on this at end of article) as part of the outline application. If approved, this would bind future detailed schemes to fixed standards for layout, height, streets, green space and public realm, rather than leaving design quality to later negotiation. This represents a significant procedural shift in how design control is being proposed for a major site.

What the Planning Statement tells us


The Planning Statement is the main policy justification for the development. It explains why the applicant believes this scale of development should be permitted on this site.

Its core arguments are:

  • There is a significant unmet housing need across Kingston and neighbouring boroughs
  • Brownfield land alone cannot meet housing targets
  • The site is said to make only a weak contribution to Green Belt purposes due to the dominance of major road infrastructure and existing urban fringe uses
  • The proposal offers exceptionally high affordable housing provision
  • The scheme is structured around early delivery of transport, landscape and utility infrastructure

The Planning Statement also confirms the maximum development parameters: up to 2,000 homes, a care home, up to 18,295 square metres of non-residential floorspace and around 8.9 hectares of public open space. Importantly, it is the Planning Statement that frames this as a “grey belt release” justified by public benefits, rather than a conventional Green Belt development.

What the Design and Access Statement tells us


The Design and Access Statement explains what kind of place this development is intended to become, and how the masterplan has evolved. Its key themes are:

  • A landscape-led structure, with a large central park, ecological corridors and extensive new planting
  • A strong emphasis on active travel, with walking, cycling and public transport prioritised over car use
  • A low average parking level of around 0.4 spaces per home
  • A movement hierarchy built around a north–south boulevard, quieter residential streets and an edge road screened by landscape bunds
  • Play, drainage and green space designed together as an integrated system

The Statement also introduces the design ambition of “mansion block” style development – mid-rise perimeter blocks set within a parkland framework rather than a suburban estate model. It is important to note that the Illustrative Masterplan shown in the document is not for approval. It is a worked example to demonstrate what could be built within the agreed rules.

What the Design Code (Design Guide) does


The Design Code, also referred to as the Design Guide, is the most legally significant design document in the submission. If approved, it will bind all future detailed planning applications on the site. It sets out fixed rules for:

  • Building heights and massing
  • Street hierarchy and movement
  • Treatment of public spaces
  • Landscape structure
  • Active frontages and town centre uses
  • Residential typologies and edge conditions

In simple terms, this is the document that will determine whether future developers must actually build what is being promised in principle.

For a scheme delivered over a decade by multiple parties, the Design Code is intended to stop gradual erosion of quality, green space and walkability.

Why design codes matter here


National planning policy now strongly supports the use of design codes to secure good design, particularly for large and complex sites. In theory, a robust design code allows communities and councils to move from vague aspirations to enforceable rules about what is acceptable. For Hook Park, the Design Code will be the key tool that determines whether:

  • The landscape-led vision is retained over time
  • Car use remains genuinely constrained
  • Building heights remain appropriate to their setting
  • Public spaces remain public and well-designed
  • Quality is protected as different phases come forward

However, design codes are only as strong as their wording and as effective as their enforcement. If they are too flexible, or if later viability arguments weaken them, the original ambitions can still be diluted.

Share this post

Last Updated on December 10, 2025 by Kingston Society